Wolf Appliance Company Ventilation Hood PL462212 User Manual

P R O V E N T I L AT I O N H O O D S  
USE & CARE INFORMATION  
 
I N T RO D U C I N G WOLF PRO VENTILATION HOODS  
THANK YOU  
Your purchase of a Wolf Pro ventilation hood  
attests to the importance you place upon the  
quality and performance of your cooking  
equipment. We understand this importance  
and have designed and built your ventilation  
hood with quality materials and workmanship  
to give you years of dependable service.  
C O N TAC T  
I N F O R M AT I O N  
We know you are eager to start cooking, but  
before you do, please take some time to read  
this Use & Care Information. Whether you are  
a beginning cook or an expert chef, it will be  
to your benefit to familiarize yourself with the  
safety practices, features, operation and care  
recommendations of the Wolf Pro ventilation  
hood.  
Wolf Customer  
Service:  
800-332-9513  
Website:  
wolfappliance.com  
We appreciate your choice of a Wolf  
Appliance product and welcome any sugges-  
tions or comments you may have. To share  
your opinions with us, call 800-332-9513.  
Your Wolf ventilation hood is protected by a  
warranty that is one of the finest in the  
industry. Take a moment to read the warranty  
statement on page 19 and refer to it should  
service become necessary.  
3
 
S A F E T Y I N S T RU C T I O N S A N D P R E C AU T I O N S  
READ AND SAVE THESE INSTRUCTIONS  
Read this Use & Care Information  
carefully before using your new  
ventilation unit to reduce the risk of  
fire, electrical shock or injury to  
persons.  
Installation work and electrical  
wiring must be done by qualified  
person(s) in accordance with all  
applicable codes and standards,  
including fire-rated construction  
codes and standards.  
Sufficient air is needed for proper  
combustion and exhausting of gases  
through the flue (chimney) of fuel-  
burning equipment to prevent  
backdrafting.  
To reduce the risk of fire, electric  
shock or injury to persons,  
observe the following:  
Use this unit only in the manner  
intended by Wolf Appliance  
Company. If you have questions,  
contact us at 800-332-9513.  
To reduce the risk of electric  
shock, this fan should only be  
used with fan speed control  
CM-18RT1 and CM-18RSTU2  
(809403), manufactured by Trivar  
Laboratories, Inc.  
Before servicing or cleaning unit,  
switch power off at service panel  
and lock the service disconnecting  
means to prevent power from being  
switched on accidentally. When the  
service disconnecting means cannot  
be locked, securely fasten a  
prominent warning device, such as  
a tag, to the service panel.  
4
 
Ducted fans must always be vented  
to the outdoors.  
To reduce the risk of fire and to  
properly exhaust air, be certain to  
duct air outside. Do not vent  
exhaust air into spaces within  
walls or ceilings or into attics,  
crawl spaces or garages.  
To reduce the risk of fire, use only  
metal ductwork.  
This unit must be grounded.  
For best capture of cooking  
impurities, the bottom of the hood  
should be a minimum of 30" (762)  
and a maximum of 36" (914) above  
the countertop.  
Follow the heating equipment  
manufacturer’s guidelines and safety  
standards, such as those published  
by the National Fire Protection  
Association (NFPA), the American  
Society for Heating, Refrigeration  
and Air Conditioning Engineers  
(ASHRAE) and the local code  
authorities.  
This product may have sharp  
edges. Be careful to avoid cuts and  
abrasions during installation and  
cleaning.  
Please read specification label on  
product for further information and  
requirements.  
When cutting or drilling into wall or  
ceiling, do not damage electrical  
wiring or other hidden utilities.  
To reduce the risk of fire or electric  
shock, do not use this hood with an  
additional speed control device.  
5
 
S A F E T Y I N S T RU C T I O N S A N D P R E C AU T I O N S  
READ AND SAVE THESE INSTRUCTIONS  
TO REDUCE THE RISK OF A COOKTOP  
GREASE FIRE:  
TO REDUCE THE RISK OF INJURY  
TO PERSONS IN THE EVENT OF  
A GREASE FIRE, OBSERVE THE  
FOLLOWING:  
Never leave surface units  
unattended at high settings.  
Boilovers cause smoking and greasy  
spillovers that may ignite. Heat oils  
slowly on low or medium settings.  
Smother flames with a close-  
fitting lid, baking sheet or other  
metal tray, then turn off the gas  
burner. Be careful to prevent  
burns. If the flames do not go out  
immediately, evacuate and call  
the fire department.  
Always turn hood ON when cooking  
at high heat or when flambéing food  
(i.e. Crepes Suzette, Cherries  
Jubilee, Peppercorn Beef Flambé).  
Clean ventilating fans frequently.  
Grease should not be allowed to  
accumulate on fan or filter.  
Do not use water, including wet  
dishcloths or towels—a violent  
steam explosion will result.  
Use proper pan size. Always use  
cookware appropriate for the size of  
the surface element.  
Never pick up a flaming pan—  
you may be burned.  
6
 
USE AN EXTINGUISHER ONLY IF:  
To avoid motor bearing damage and  
noisy and/or unbalanced impellers,  
keep drywall spray, construction  
dust, etc., off blower.  
You know you have a Class ABC  
extinguisher and you already know  
how to operate it.  
Two installers are recommended  
because of the large size and weight  
of this hood.  
The fire is small and contained in  
the area where it started.  
The fire department is being called.  
Your hood motor has a thermal  
overload that will automatically  
shut off the motor if it becomes  
overheated. The motor will restart  
when it cools down. If the motor  
continually shuts off and restarts,  
contact a Wolf authorized service  
center.  
You can fight the fire with your back  
to an exit (NFPA Fire Safety Tips).  
For general ventilating use only.  
Do not use to exhaust hazardous  
or explosive materials and vapors.  
Avoid using food products that  
produce flames under the wall hood  
or island hood.  
Take care when using cleaning  
agents or detergents.  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
7
 
WO L F PRO VENTILATION HOOD F E AT U R E S  
PRO LOW-PROFILE WALL H O O D S  
22" (559) deep wall ventilation hood  
available in 30" (762), 36" (914), 42" (1067)  
and 48" (1219) widths  
Heat Sentry feature automatically turns unit  
on when heat is sensed and automatically  
adjusts blower speed  
Classic stainless steel finish  
Halogen lighting with two settings  
Low-Profile Wall Hood  
Rail option wall hoods (R) come with a  
classic stainless steel decorative rail and  
stand-offs—optional platinum or brass rail  
available to match dual fuel range bezels  
Removable, dishwasher-safe, restaurant-  
grade stainless steel baffle filters  
Transition with backdraft damper included  
Two and five year residential warranty  
(exclusions apply); see warranty at the end  
of this guide  
Internal, in-line and remote blower options  
Low-Profile Wall Hood  
(R) Rail Option  
Heavy-duty, 16-gauge brushed stainless  
steel construction  
Stainless steel enclosed liner  
Continually welded seams, hemmed edges  
and sides, and hand-finished craftsmanship  
Recessed easy-access controls  
Infinite-speed blower control  
L OW- P RO F I L E WA L L H O O D  
Model PW482210R shown  
Hand-finished  
craftsmanship  
Classic stainless  
steel finish  
Decorative rail  
(optional)  
Backdraft damper  
Welded seams  
and hemmed edges  
Stainless steel  
baffle filters  
Location of rating  
plate  
Recessed easy-  
access controls  
Halogen lighting  
Infinite-speed  
blower control  
8
 
WO L F PRO VENTILATION HOOD F E AT U R E S  
PRO 24" (610) DEEP WALL H O O D S  
24" (610) deep wall ventilation hood  
available in 30" (762), 36" (914), 42" (1067),  
48" (1219), 54" (1372), 60" (1524) and 66"  
(1676) widths  
Heat Sentry feature automatically turns unit  
on when heat is sensed and automatically  
adjusts blower speed  
Halogen lighting with two settings  
24" (610) Wall Hood  
Classic stainless steel finish  
Removable, dishwasher-safe, restaurant-  
grade stainless steel baffle filters and  
grease cups  
Rail option wall hoods (R) come with a  
classic stainless steel decorative rail and  
stand-offs—optional platinum or brass rail  
available to match dual fuel range bezels  
Transition with backdraft damper included  
Two and five year residential warranty  
(exclusions apply); see warranty at the end  
of this guide  
Internal, in-line and remote blower options  
24" (610) Wall Hood  
(R) Rail Option  
Heavy-duty, 16-gauge brushed stainless  
steel construction  
Stainless steel enclosed liner  
Continually welded seams, hemmed edges  
and sides, and hand-finished craftsmanship  
Recessed easy-access controls  
Infinite-speed blower control  
WO L F  
2 4 " ( 6 1 0 ) D E E P WA L L H O O D  
WA R R A N T Y  
Model PW482418R shown  
Wolf products are  
covered by a two  
and five year  
Hand-finished  
craftsmanship  
Classic stainless  
steel finish  
Decorative rail  
(optional)  
residential warranty  
(exclusions apply).  
See warranty  
Backdraft damper  
Welded seams  
and hemmed edges  
details at the end  
of this guide.  
Stainless steel  
baffle filters  
Location of rating  
plate  
Recessed easy-  
access controls  
Halogen lighting  
Infinite-speed  
blower control  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
9
 
WO L F PRO VENTILATION HOOD F E AT U R E S  
PRO 27" (686) DEEP WALL H O O D S  
27" (686) deep wall ventilation hood  
available in 30" (762), 36" (914), 42" (1067),  
48" (1219), 54" (1372), 60" (1524) and 66"  
(1676) widths  
Heat Sentry feature automatically turns unit  
on when heat is sensed and automatically  
adjusts blower speed  
Halogen lighting with two settings  
27" (686) Wall Hood  
Classic stainless steel finish  
Heat lamps—two R40 250-watt maximum  
bulbs required (bulbs not included)  
Rail option wall hoods (R) come with a  
classic stainless steel decorative rail and  
stand-offs—optional platinum or brass rail  
available to match dual fuel range bezels  
Removable, dishwasher-safe, restaurant-  
grade stainless steel baffle filters and  
grease cups  
Internal, in-line and remote blower options  
27" (686) Wall Hood  
(R) Rail Option  
Transition with backdraft damper included  
Heavy-duty, 16-gauge brushed stainless  
steel construction  
Two and five year residential warranty  
(exclusions apply); see warranty at the end  
of this guide  
Stainless steel enclosed liner  
Continually welded seams, hemmed edges  
and sides, and hand-finished craftsmanship  
Recessed easy-access controls  
Infinite-speed blower control  
2 7 " ( 6 8 6 ) D E E P WA L L H O O D  
Model PW482718R shown  
Hand-finished  
craftsmanship  
Classic stainless  
steel finish  
Decorative rail  
(optional)  
Backdraft damper  
Welded seams  
and hemmed edges  
Stainless steel  
baffle filters  
Location of rating  
plate  
Heat lamps  
Halogen lighting  
Infinite-speed  
blower control  
Recessed easy-  
access controls  
10  
 
WO L F PRO VENTILATION HOOD F E AT U R E S  
PRO WALL CHIMNEY H O O D S  
Wall chimney ventilation hood available in  
36" (914), 42" (1067), 48" (1219) and 54"  
(1372) widths  
Heat Sentry feature automatically turns unit  
on when heat is sensed and automatically  
adjusts blower speed  
Classic stainless steel finish  
Halogen lighting with two settings  
Wall Chimney Hood  
Optional 6" (152), 12" (305), 18" (457) and  
24" (610) duct covers available to complete  
the chimney design  
Removable, dishwasher-safe, restaurant-  
grade stainless steel baffle filters and  
grease cups  
Rail option wall hoods (R) come with a  
classic stainless steel decorative rail and  
stand-offs—optional platinum or brass rail  
available to match dual fuel range bezels  
Transition with backdraft damper included  
Two and five year residential warranty  
(exclusions apply); see warranty at the end  
of this guide  
Wall Chimney Hood  
(R) Rail Option  
Internal, in-line and remote blower options  
Heavy-duty, 16-gauge brushed stainless  
steel construction  
Stainless steel enclosed liner  
Continually welded seams, hemmed edges  
and sides, and hand-finished craftsmanship  
Recessed easy-access controls  
Infinite-speed blower control  
WO L F  
WA L L C H I M N E Y H O O D  
WA R R A N T Y  
Model PWC482418R shown  
Wolf products are  
covered by a two  
and five year  
Hand-finished  
craftsmanship  
Classic stainless  
steel finish  
Decorative rail  
(optional)  
residential warranty  
(exclusions apply).  
See warranty  
Backdraft damper  
Welded seams  
and hemmed edges  
details at the end  
of this guide.  
Stainless steel  
baffle filters  
Location of rating  
plate  
Recessed easy-  
access controls  
Halogen lighting  
Infinite-speed  
blower control  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
11  
 
WO L F PRO VENTILATION HOOD F E AT U R E S  
PRO ISLAND H O O D S  
Island ventilation hood available in 36"  
(914), 42" (1067), 54" (1372) and 66" (1676)  
widths  
Heat Sentry feature automatically turns unit  
on when heat is sensed and automatically  
adjusts blower speed  
Classic stainless steel finish  
Halogen lighting with two settings  
Island Hood  
Rail option island hoods (R) come with  
classic stainless steel decorative rails and  
stand-offs for both sides of the hood—  
optional platinum or brass rails available to  
match dual fuel range bezels  
Removable, dishwasher-safe, restaurant-  
grade stainless steel baffle filters and  
grease cups  
Transition with backdraft damper included  
Two and five year residential warranty  
(exclusions apply); see warranty at the end  
of this guide  
Internal, in-line and remote blower options  
Island Hood  
(R) Rail Option  
Heavy-duty, 16-gauge brushed stainless  
steel construction  
Stainless steel enclosed liner  
Continually welded seams, hemmed edges  
and sides, and hand-finished craftsmanship  
Recessed easy-access controls  
Infinite-speed blower control  
I S L A N D H O O D  
Model PI543418R shown  
Hand-finished  
craftsmanship  
Classic stainless  
steel finish  
Decorative rail  
(optional)  
Backdraft damper  
Welded seams  
and hemmed edges  
Stainless steel  
baffle filters  
Location of rating  
plate  
Recessed easy-  
access controls  
Halogen lighting  
Infinite-speed  
blower control  
12  
 
WO L F PRO VENTILATION HOOD F E AT U R E S  
PRO HOOD L I N E R S  
Stainless steel enclosed liner with seamed  
construction  
Halogen lighting with two settings  
Removable, dishwasher-safe, restaurant-  
grade stainless steel baffle filters  
Available for use with 36" (914), 42" (1067),  
48" (1219), 54" (1372) and 60" (1524) custom  
hoods  
Pro Hood Liner  
Transition with backdraft damper included  
Two and five year residential warranty  
(exclusions apply); see warranty at the end  
of this guide  
Internal, in-line and remote blower options  
Recessed easy-access controls  
Infinite-speed blower control  
Heat Sentry feature automatically turns unit  
on when heat is sensed and automatically  
adjusts blower speed  
WO L F  
P RO H O O D L I N E R  
WA R R A N T Y  
Model PL462212 shown  
Wolf products are  
covered by a two  
and five year  
Stainless steel  
enclosed liner  
Seamed  
construction  
residential warranty  
(exclusions apply).  
See warranty  
Backdraft damper  
Stainless steel  
baffle filters  
details at the end  
of this guide.  
Location of rating  
plate  
Recessed easy-  
access controls  
Halogen lighting  
Infinite-speed  
blower control  
13  
 
WO L F PRO VENTILATION HOOD U S E & C A R E  
R E C E S S E D CONTROLS  
HEAT SENTRY F E AT U R E  
Controls for Pro ventilation hoods and hood  
liners are recessed under the front edge of the  
hood. Refer to the illustration below.  
Heat Sentry feature turns the ventilation hood  
on when heat is sensed and adjusts the blower  
speed automatically. The Heat Sentry feature is  
activated when the exhaust temperature from  
the hood reaches 200˚F (95˚C) and deactivated  
when the exhaust temperature decreases to  
186˚F (85˚C).  
L I G H T C O N T RO L  
The left rotary switch operates the halogen  
lights. There are two settings, HIGH and LOW.  
The LOW setting can be used as a night-light.  
From the OFF position, turn the switch to the  
desired light setting, left for LOW and right for  
HIGH light setting.  
At 200˚F (95˚C) the blower motor will automati-  
cally adjust to HIGH speed. When the sensor  
cools down to 186˚F (85˚C) it adjusts the blower  
back to the setting on the blower control. For  
example, if blower motor is in LOW speed and  
threshold temperature is reached, the blower  
will increase to HIGH speed.  
H E AT L A M P C O N T RO L  
If your hood is equipped with heat lamps, a  
center rotary switch will control the lamps.  
Each heat lamp may function independently or  
both lamps may be activated simultaneously  
from the single switch. From the OFF position,  
simply turn the switch to the right to activate  
the right heat lamp or to the left to activate the  
left lamp. When the switch is in the vertical  
position, both heat lamps will be activated.  
FILTER R E M OVA L  
To remove the stainless steel filters, push each  
filter up at the angle it is placed in and rotate  
down. Remove the center filter first. Take out  
the grease cups (if applicable) placed on the  
bottom edge of the hood coinciding with the  
bottom edge of the filters. Gloves should be  
worn to provide the proper grip. Reinstall  
using the reverse procedure as shown in the  
illustration below. Outer filters may need to be  
pushed over while the center filter is reinstalled.  
B L OW E R C O N T RO L  
The right rotary switch that operates the  
blower is variable, allowing infinite control of  
the blower speed. Rotate the switch fully  
counterclockwise to turn the blower off.  
IMPORTANT NOTE: DO NOT operate the  
ventilation hood without the filters. This may  
cause damage to the blower or other internal  
components of the hood.  
Blower  
Control  
Spring  
Heat Lamps  
Control  
Halogen  
Lights Control  
Filter  
Grease Cup  
SIDE VIEW  
Recessed controls  
Filter reinstallation—27" (686) deep  
wall hood shown  
14  
 
WO L F PRO VENTILATION HOOD U S E & C A R E  
HALOGEN L I G H T I N G  
HEAT L A M P S  
All Wolf Pro ventilation hoods and hood liners  
have halogen lighting with two settings.  
Halogen bulbs are included with the hood.  
Wolf Pro 27" (686) deep wall hoods are  
equipped with two heat lamp locations that  
require R40, 250W maximum bulbs. Heat lamp  
bulbs are not included with the hood.  
Pro wall hoods, 30" (762), 36" (914) and 42"  
(1067) wide require two 50W, 120V par 20  
halogen bulbs. 48" (1219), 54" (1372), 60"  
(1524) and 66" (1676) wide hoods require  
three 50W, 120V par 20 halogen bulbs.  
To replace, turn off the ventilation hood blower  
and lights. Once the heat lamp bulb is cool,  
use a soft cloth to unscrew the bulb and  
replace.  
Pro wall chimney hoods, 36" (914) and 42"  
(1067) wide require two 50W, 120V par 20  
halogen bulbs. 48" (1219) and 54" (1372)  
wide hoods require three 50W, 120V par 20  
halogen bulbs.  
Be sure that the heat lamp bulb is cool  
before touching.  
Pro island hoods, 36" (914) and 42" (1067)  
wide require two 50W, 120V par 20 halogen  
bulbs. 54" (1372) and 66" (1676) wide hoods  
require three 50W, 120V par 20 halogen  
bulbs.  
Pro hood liners, 34" (864), 40" (1016) and  
46" (1168) wide require two 50W, 120V  
MR-16 halogen bulbs. 52" (1321) and 58"  
(1473) wide hood liners require three 50W,  
120V MR-16 halogen bulbs.  
To replace halogen bulbs, turn off the ventila-  
tion hood blower and lights. Once the halogen  
bulb is cool, use a soft cloth to unscrew the  
bulb and replace.  
Be sure that the bulb is cool before  
replacing. Halogen bulbs get hot instantly  
and adjacent parts may retain heat.  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
15  
 
WO L F PRO VENTILATION HOOD U S E & C A R E  
CLEANING A N D CARE  
Most surfaces of your Wolf Pro hood are  
stainless steel. Although resistant to most  
stains, it is not totally impervious to damage.  
D E C O R AT I V E R A I L  
Clean the decorative hood rail using warm  
soapy water. Then hand dry with a clean,  
soft cloth.  
G E N E R A L C L E A N I N G  
S I G N AT U R E  
P O L I S H  
It is not necessary to remove the decorative  
rail from the hood assembly. It should be  
cleaned in place.  
Salt and some cooking liquids may pit and  
stain the surface. Always remove any film  
or spills immediately.  
Signature Polish  
is available from  
Signature Limited  
Laboratory,  
Be careful not to pull or hang on the bar, as  
this could damage the hood assembly.  
Avoid using abrasive cleaners. They will  
permanently scratch the surface.  
P.O. Box 13436,  
Dayton, Ohio  
45413-0436, or  
call 877-376-5474  
(toll free).  
Do not use steel wool pads.  
S TA I N L E S S S T E E L F I N I S H  
Be careful not to soak the rotary switches.  
Although they are sealed, excessive  
moisture may cause damage to the  
controls.  
Use a soft, nonabrasive stainless steel cleaner  
like Signature Polish (see side note) and apply  
with a soft lint-free cloth. To bring out the  
natural luster, lightly wipe the surface with a  
water-dampened microfiber cloth, followed  
with a dry microfiber cloth. All work should  
follow the same grain direction as the finish.  
Best results are obtained by keeping the cloth  
in continuous contact with the metal.  
A spray degreaser will remove fingerprints  
and greasy spatters. Spray on a cloth and  
wipe surface. Buff dry immediately to avoid  
streaking.  
Use white vinegar and water to remove  
hard water stains.  
Use a clean cloth or sponge, wipe with  
warm water and mild detergent. Rinse and  
dry immediately.  
Under no circumstances should you use a  
metallic or highly abrasive cleaner or  
cloth, as this will damage the finish.  
Apply a protective polish like Signature  
Polish (see side note) to the surface to  
maintain luster and protect against food  
stains. Apply the polish following the same  
grain direction as the finish.  
16  
 
WO L F PRO VENTILATION HOOD U S E & C A R E  
CLEANING A N D CARE  
TROUBLESHOOTING G U I D E  
F I LT E R S A N D G R E A S E C U P S  
P RO B L E M  
P O S S I B L E S O L U T I O N  
The stainless steel baffle filters and grease  
cups (if applicable) should be cleaned approxi-  
mately every month, depending on use. You  
may need to clean the filters more often if your  
cooking style generates large amounts of  
grease (for example, frying or wok cooking).  
Motor and lights  
do not operate  
A fuse in your home may be blown or the  
circuit breaker tripped. Replace the fuse  
or reset the circuit breaker.  
Electrical connections at the electrical box  
may be made incorrectly. Contact your  
installer.  
The filters are dishwasher safe and are  
designed to fit most dishwashers. Wolf  
recommends wiping filters and grease cups to  
remove any excess grease before placing in  
the dishwasher.  
Motor runs but lights  
will not operate  
The bulb may have burned out.  
Switch operation may be faulty.  
For filter removal and reinstallation, refer to  
page 14.  
Motor does not  
function, but lights  
are operational  
Check to ensure blower is plugged into  
hood receptacle.  
Connect motor directly to a supply cord,  
bypassing hood. If the motor runs,  
contact a Wolf authorized service center  
to check switch operation and wiring  
between hood and blower.  
Excessive fan speed  
and/or noise  
Check to ensure blower wheel is not  
hitting side of blower. Adjust if necessary.  
Check blower mounting hardware.  
Tighten if necessary.  
Check for obstructions in damper flap and  
ductwork.  
Check for excessive length of duct run,  
number of transitions and elbows, and  
duct diameter.  
Low fan speed adjustment may be  
needed.  
Dimensions in parentheses are in  
millimeters unless otherwise specified.  
17  
 
WO L F SERVICE I N F O R M AT I O N  
SERVICE I N F O R M AT I O N  
When requesting information, literature,  
replacement parts or service, always refer to  
the model and serial number of your ventila-  
tion hood. This information is found on the  
product rating plate located inside the left wall  
of the hood shell. Refer to the illustration for  
your specific model on pages 8–13 for the  
location of the rating plate. Record the rating  
plate information below for future reference.  
P RO D U C T R E G I S T R AT I O N  
Register your new Wolf product today so that  
we may ensure your satisfaction. You may  
register by one of the following options:  
C O N TAC T  
I N F O R M AT I O N  
1) Mail in the completed Wolf Product  
Registration Card.  
2) Register online at wolfappliance.com  
.
Wolf Customer  
Service:  
800-332-9513  
3) Register by phone by calling the Wolf  
Customer Service Department at  
Model Number  
800-332-9513  
.
Website:  
wolfappliance.com  
The model and serial numbers of your appli-  
ance are printed on the enclosed Wolf Product  
Registration Card. If you provide us with your  
e-mail address, we will send you exciting new  
product updates and recipes as they become  
available, along with information on special  
events.  
Serial Number  
Installation Date  
Wolf Authorized Service Center and Phone  
Wolf Dealer and Phone  
B E F O R E C A L L I N G F O R S E RV I C E  
Before calling your Wolf authorized service  
center, refer to the Troubleshooting Guide on  
page 17. Check the household fuse or circuit  
breaker to see if it has been blown or tripped  
and that the electrical connection to the  
appliance has not been disconnected. A power  
outage may also have caused a disruption in  
service.  
The information and images are the copyright  
property of Wolf Appliance Company, Inc.,  
an affiliate of Sub-Zero Freezer Company, Inc.  
Neither this book nor any information or images  
contained herein may be copied or used in  
whole or in part without the express written  
permission of Wolf Appliance Company, Inc.,  
an affiliate of Sub-Zero Freezer Company, Inc.  
©Wolf Appliance Company, Inc. all rights  
reserved.  
18  
 
W O L F A P P L I A N C E P R O D U C T S  
L I M I T E D W A R R A N T Y  
RESIDENTIAL USE ONLY  
FULL TWO YEAR WARRANTY*  
For two years from the date of original installation, your Wolf Appliance product warranty covers all  
parts and labor to repair or replace any part of the product that proves to be defective in materials  
or workmanship. All service provided by Wolf Appliance Company under the above warranty must  
be performed by a Wolf Appliance authorized service center, unless otherwise specified by Wolf  
Appliance Company. Service will be provided in the home during normal business hours.  
LIMITED THIRD THROUGH FIFTH YEAR WARRANTY  
From the third through fifth year from the date of original installation, Wolf Appliance Company will  
repair or replace the following parts that prove to be defective in materials or workmanship. Labor to  
remove and replace defective parts is not covered. Wolf Appliance Company recommends that you  
use a Wolf Appliance authorized service center to perform such service.  
Gas Burners (excluding appearance), Electric Heating Elements, Blower Motors (vent hoods),  
Electronic Control Boards, Magnetron Tubes and Induction Generators  
LIMITED LIFETIME WARRANTY  
For the life of the product, Wolf Appliance Company will repair or replace any BBQ body or BBQ hood  
that rusts through due to defective material or workmanship. Labor to remove and replace defective  
parts is not covered. Wolf Appliance Company recommends that you use a Wolf Appliance author-  
ized service center to perform such service.  
TERMS APPLICABLE TO EACH WARRANTY  
The warranty applies only to products installed for normal residential use. The warranty applies only  
to products installed in any one of the fifty states of the United States, the District of Columbia or  
the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect  
caused by negligence, accident or improper use, maintenance, installation, service or repair.  
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT WOLF  
APPLIANCE COMPANY, INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY  
WARRANTY ARISING BY OPERATION OF LAW. WOLF APPLIANCE COMPANY, INC. WILL NOT BE  
RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE  
BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR  
STATUTORY.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the  
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and  
you may also have other legal rights that vary from state to state.  
To receive parts and/or service and the name of the Wolf Appliance authorized service center  
nearest you, contact Wolf Appliance Company, Inc., P.O. Box 44848, Madison, Wisconsin 53744;  
check the Locator section of our website, wolfappliance.com, or call 800-332-9513.  
*Stainless Steel (classic, platinum and carbon) doors, panels and product frames are covered by a  
limited 60 day parts and labor warranty for cosmetic defects.  
19  
 
WOLF APPLIANCE COMPANY, INC.  
P. O. BOX 44848  
MADISON, WI 53744  
800-332-9513  
WOLFAPPLIANCE.COM  
8 1 0 2 6 1  
2 / 2 0 0 7  
 

Westinghouse Car Satellite TV System DW50F1Y1 User Manual
Westinghouse Computer Monitor L1928NV User Manual
Whirlpool Air Conditioner ACU072XE User Manual
Whirlpool Washer CAWB522SQ0 User Manual
Wolf Appliance Company Ventilation Hood L342212 User Manual
Yamaha Stereo Amplifier DSP A990 User Manual
Zanussi Refrigerator ZRB 3041 User Manual
Zanussi Washer Dryer WD 1015 M User Manual
Zanussi Washer FJ 1094 G User Manual
Zephyr Ventilation Hood AK8000AS User Manual