Wharfedale Speaker System EVP 12PM User Manual

E V P - P S E R I E S P O W E R E D L O U D S P E A K E R S  
EVP-P SERIES PROFESSIONAL SPEAKER  
SYSTEMS USER MANUAL  
EVP-12P, EVP-12PM, EVP-15P, EVP-15PM & EVP15PSB.  
ƽ W ARNING & SAFETY INSTRUCTIONS  
1. READ INSTRUCTIONS carefully before operating this product.  
RETAIN these instructions.  
with an extension cable unless the pins can be fully inserted.  
2.  
7. CABLES - Use quality screened cables for signal connections.  
3. COMPLY WITH WARNINGS - All warnings and instructions for  
8. ƽ ꢀ RIGGING • SUSPENDING • MOUNTING  
this product should be adhered to.  
The rigging, suspension or mounting of this speaker system can  
expose members of the public to serious health risks and even  
death. UNDER NO CIRCUMSTANCES ATTEMPT TO RIG, SUS-  
PEND OR OTHERWISE MOUNT THIS SYSTEM UNLESS YOU  
ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELE-  
VANT LOCAL, STATE AND NATIONAL AUTHORITIES. ALL  
RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF  
YOU ARE NOT PROPERLY QUALIFIED OR DO NOT KNOW OF  
PERTINENT REGULATIONS, CONSULT QUALIFIED PERSON-  
NEL FOR ADVICE AND ASSISTANCE.  
Ɖ
4. WATER & MOISTURE  
- This Wharfedale Pro unit should  
not be used near liquids. If should not have liquids placed on or  
in close proximity as there are DANGEROUS VOLTAGES  
present.  
5. ƽ VENTILATION/AIR FLOW: This Wharfedale Pro unit  
should not have its heat sinks obstructed from air flow. It should  
not be situated in a built-in installation that may hamper air flow to  
the heat sinks. It should not be placed near heat sources.  
9. CAUTION: These professional loudspeaker systems are  
capable of generating very high sound pressure levels. Use care  
with placement and operation to avoid exposure to excessive lev-  
els that can cause permanent hearing damage.  
6. POWER SUPPLY: This Wharfedale Pro unit should be  
only connected to a power supply as stated on the unit. Power  
supply cables should be routed where they will not be walked on  
or pinched by objects placed adjacent or upon them.  
10. SERVICING - The user should not attempt to service this  
7. ELECTRIC SHOCK: Care should be taken that the ground-  
product except that mentioned in this manual.  
ing of this unit is NOT defeated. Do not use this units power cable  
Wharfedale Pro EVP-P Series of Professional Sound Reinforcement Loudspeakers  
200W RMS/320W Peak amplifier  
Hi/Low EQ control in the master section  
Integral tripod stand adaptor (except monitors)  
Balanced line output  
Combined Jack and XLR balanced input connectors  
Power on/off LED on front and back of unit  
Linkwitz Riley crossover for vocal clarity  
Heavy duty steel grille  
(EVP 12P,12PM,15P,15PM)  
300W RMS/480W Peak in EVP-15PSB only  
Built in 2 channel mixer with line and mic inputs  
Durable black carpet finish  
Integral High Frequency Driver Overload protection  
“PRO-TECH” TM  
HF protection bulb  
Thermal overload, DC fault and short circuit protection  
Active crossover (EVP-15PSB only)  
Constant directivity HF horn  
2 way trapezoidal ultra compact bass reflex design  
Unpacking  
Wharfedale Pro Limited Warranty*  
Wharfedale Pro EVP-P Series loudspeaker systems are warranted to be  
All Wharfedale Pro products are fully  
clear of manufacturing or materials defects for a period of one year from  
the original date of purchase. In the event of malfunction, contact your  
authorised Wharfedale Professional dealer or distributor for information.  
checked before leaving the factory. After  
unpacking please inspect cabinets for any  
physical damage. Please retain the ship-  
ping carton if possible and internal packing  
material in case the unit needs to be  
returned. Please check as soon as possible the unit is functioning. In  
the event of any damage please contact your dealer immediately so  
that a written claim for damages can be made.  
*Be aware that warranty details may differ from country to country. Contact your dealer or  
distributor for information. These terms do not infringe your statutory rights.  
Operating/Use  
quality (see description and table of balanced line operation).  
1. The EVP-P series has 2 XLR 1/4” jack Combi sockets.The two  
stereo inputs are mixed down to mono enabling the connection of  
stereo output products.  
3. If using XLR CONNECTORS, insert the XLR until locked in. If  
using a jack plug insert until secure.  
2. Connect the provided power cable to the IEC mains connector  
on rear of cabinet.  
4. Power up audio mixer or processor ensuring connections are  
made.  
3 Connect the signal cable (balanced or un balanced, see table  
and description) from audio mixer or processor securely to your  
EVP-P unit (the internal amplifier should be off, power down  
mode). Where possible use quality connectors. Only use  
screened audio cable for the signal input from the audio mixer or  
processor. If possible use balanced line signal leads for optimum  
5. Power up EVP-P internal amplifier with levels on zero. Confirm  
EVP-P speakers are operating.  
6. The EVP-15PSB has 2 XLR/1/4” Jack Combi Sockets - one  
line in, for system input and one line out for EVP-P as main speak-  
ers. Two main loudspeakers may also be linked to one subwoofer.  
 

Weed Eater Trimmer 530163363 User Manual
Weil McLain Boiler 550 100 067 0608 User Manual
Whirlpool Air Conditioner ACQ082XK1 User Manual
White Lawn Mower 183 387 190 User Manual
Wibur Curtis Company Coffee Grinder DHG User Manual
WorldSpace Stereo System TONGSHI User Manual
Xerox Copier C2424 User Manual
Yamaha Welding System generator User Manual
Zanussi Oven ZHF 470 User Manual
Znyx Networks Switch bh5700 User Manual