Westinghouse Computer Monitor L1920NW User Manual

USER’S MANUAL  
MANUEL DE LUTILISATEUR  
MANUAL DEL USUARIO  
L1920NW  
L2220HW  
Monitor  
Moniteur  
 
PRECAUTIONS  
5.Disconnect the power cable from the power supply if:  
5.1 You will not use the monitor for an extended period.  
5.2 The cable is damaged or frayed.  
5.3 The monitor has been dropped or the cabinet damaged.  
5.4 A distinct change in performance indicates a need for servicing.  
Information for users applicable in European Union countries  
The symbol on the product or its packaging signifies that this product has to be  
disposed separately from ordinary household wastes at its end of life. Please  
kindly be aware that this is your responsibility to dispose electronic equipment  
at recycling centers so as to help conserve natural resources. Each country in  
the European Union should have its collection centers for electrical and  
electronic equipment recycling. For information about your recycling drop off  
area, please contact your local related electrical and electronic equipment  
waste management authority or the retailer where you bought the product.  
Maintenance  
1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent  
solution. Do not use any abrasive materials or solvents such as alcohol or benzene.  
2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as  
pens or screwdrivers, as the screen may scratch.  
3.Do not insert objects or spill liquids into the ventilation ports on the monitor’s rear, as  
fire, electric shock, and / or unit failure may result.  
Information for users applicable in United States of America  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE  
RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR  
FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC  
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC  
DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.  
Transporting the monitor  
1.When carrying the display for repair or servicing, please first disassemble the monitor  
and pack in its original packing. To disassemble the neck and base, please press the  
release button located on the back of the neck and detach the neck/base, then use the  
original carton and packing materials to wrap the display and its accessories.  
Installation  
1. Do not cover or block the ventilation ports on the rear of the monitor.  
2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a  
location exposed to direct sunlight, excessive dust, mechanical vibration,or shock.  
3.The apparatus shall only be used between 5° tilted forward and 15° tilted backward as  
normal operation position. If the tilt angle exceeds 15°, it shall be used for wall  
mounting or packaging only.  
Power connection  
1.Use the correct power cord for your local voltage.  
2.Use an accessible outlet close to the monitor.  
3.Do not allow anything to rest on the power cable.  
4.Only use the power adapter attached to the monitor.  
- 1 -  
 
GETTING STARTED  
Package contents  
Monitor installation  
1.Setting up the monitor  
Before beginning, ensure that the carton contains the following items:  
1.1 Take out the monitor, stand and monitor base from the package.  
1.2 Grasp the monitor with both hands and then slide the  
monitor into the neck. (Make sure the direction of the neck  
is correct)  
1. LCD Monitor  
2.Connecting signal cable  
2.1 Switch off your computer  
2. Monitor Base and Neck  
(the shape of base may vary according to the monitor model)  
2.2 Connect the signal cable to the D-SUB or DVI port at the  
rear of the monitor and tighten the connector screws  
2.3 Connect the other end of signal cable to the computer's  
VGA port or DVI port and tighten the connector screws.  
2.4 Note: Ensure the display setting does not exceed  
18.5" 1366X768@60Hz, 21.6" 1920x1080@ 60Hz.  
3.Connecting audio cable (with audio option)  
3.1 Plug the audio cable into the AUDIO port at the rear of  
the monitor.  
3. Power Cord (plug may vary according to the electrical standards  
for your area)  
4. Analog Signal Cable  
3.2 Plug the other end of the audio cable into the audio  
port of your computer or other audio source.  
5. Digital Signal Cable (optional)  
4.Connecting power  
4.1 Plug the female end of the power cord into the  
POWER port at the rear of the monitor.  
4.2 Plug the male end of the power cord into a power  
6. Audio Cable (optional)  
POWER AUDIO  
DVI  
D-SUB  
outlet.  
5.Switching on  
7. CD-ROM (contains user manual)  
Switch on your computer.  
You should now be able to see the picture. If not , refer  
to the trouble shooting section of this guide.  
8 .Quick Installation Guide  
- 2 -  
 
Identifying parts and controls  
Customizing your Monito  
r
The On Screen Display (OSD) system provides a full range of customizable tools to  
optimize your display.  
1.The LED light indicates the state of working. During operation, the LED Light is bright  
bule. When dormant, the LED Light is orange.  
2.The power button  
button to control on & off.  
3.The function keys are used for adjusting all settings. When you need some adjustment,  
you can achieve the goals by pressing any of the function menus. Details for all the  
function menus are subsequently described.  
is used to identify the state of power. You can use the power  
Although you could perform comprehensive customization, we  
strongly recommend that you use the “AUTO ADJUSTMENT”  
function.  
It can utilize the default values to thoroughly optimize the  
performance of the display. Activate the OSD munu.  
Important:  
Important:  
Select the first button on the left  
ADJUSTMENT” function.  
to activate the “AUTO  
Working with OSD Group  
You will find that the OSD is very easy to use. You can identify the function of a button  
through the corresponding icon displayed on the pop-up window of OSD. Now there are 3  
pictures, which show that a button represents different functions in different levels of the  
architecture.  
In addition, we have also prepared other relatively simple methods to  
change the display modes. There are 4 modes, which include:  
GENERAL, MOVIE, PICTURE, GAME.  
Third Level  
Second Level  
First Level  
1. Press  
2. Press any of the rest 4 buttons to activate the OSD menu.  
3. Press the corresponding function icon button on the pop-up window of the OSD.  
button to start.  
- 3 -  
 
5. Return to the higher level menu. Press  
to return to the higher level.  
Hotkeys Introduction  
E
6. Exit: Press  
to exit OSD menu; Or if you do not press any button, it will  
1.Auto Adjustment  
automatically disappear after 30 seconds.  
When the OSD functions are displayed, press the first button on the left  
you can automatically optimize the image performance.  
2.Volumn Control (with audio option)  
, and then  
to enter  
Auto-Adjustment  
Brightness  
Contrast  
General  
Movie  
English  
Français  
Deutsch  
Español  
Italiano  
When the OSD functions are displayed, press the first button on the right  
Analog(D-SUB)  
Digital(DVI)  
Theme Mode  
Menu  
Input Signal  
Select  
Picture  
Game  
the “ Volumemenu. Then press  
Press or to end.  
or  
to adjust the volume of sound.  
Power  
17 Lauguages control menu  
OSD Menu  
Language  
Main Menu  
Volume  
Nederlands  
Polski  
Svenska  
Native  
3.Theme Mode Menu  
When the OSD functions are displayed, press the second button on the left  
Display Ratio  
Full Screen  
Red  
Green  
Blue  
Dansk  
Portuquês  
Norsk  
Suomi  
Ɋɭɫɫɤɢɣ  
᮹ᴀ䁲  
to shift  
Color  
Temperature  
<
<
the mode. You may press  
and  
to make adjustments between 4 modes.  
E
.
Press  
, and then you can leave automatically  
6500K  
7500K  
9300K  
4.Main Menu  
ㅔԧЁ᭛  
䚐ạ㛨  
System  
Recall  
When the OSD functions are displayed, press the second button on the right  
to  
White Balance  
DDC/CI  
㐕储Ё᭛  
enter the main menu. And then press  
Press to enter into the option. Press  
or  
to select the option.  
Demo  
Clock  
Phase  
E
or  
to leave.  
Horizontal Position  
Vertical Position  
Information  
Function Keys Operation  
According to the tree-like directory, you can discover the whole OSD system is like a map.  
This tree-like directory can help you to become aware of the whole system. During the  
whole process, you need to know the following actions.  
1. Activate the OSD main menu: Under the energized condition, press any function key to  
execute the function.  
2. Confirm the selection: Press the  
button.  
<
3. Browse the previous or next option: Press  
and  
.
<
4. Adjust the option value: Press  
and  
to adjust the value.  
- 4 -  
 
OSD Icon List  
AUTO  
ADJUSTMENT  
HORIZONTAL  
POSITION  
* Optimize the picture performance automatically.  
* Shift the screen left or right  
* Activate the built-in color engine to enhance the graphic  
effects according to the different situations of the display.  
contents  
THEME MODE  
VERTICAL  
POSITION  
* Shift the screen up or down  
* Adjust the luminance level of the screen.  
* Adjust the contrast level of the screen.  
BRIGHTNESS  
CONTRAST  
* Adjust the monitor internal signal phase  
PHASE  
CLOCK  
DDC/CI  
* Adjust the monitor internal sampling clock rate  
* Select turn on or turn off DDC/CI function  
INPUT SIGNAL  
SELECT  
* Select the input signal from Analog, or Digital Inputs (Optional).  
* Select your own preference of language of OSD menu.  
OSD MENU  
LANGUAGE  
* 6500K: Select the setting of screen color to be reddish white.  
* 7500K: Select the setting of screen color to be 7500K.  
* 9300K: Select the setting of screen color to be bluish white.  
* 2 seconds after activation of this function, some of the  
menus will stimulate feature-grading effects 2 times over.  
COLOR  
TEMPERATURE  
DEMO  
* Show the frequency, resolution, input interface and other  
operating details about this display.  
* Adjust the mechanical specifications regarding the  
display.(Power Saving Mode, White Balance, Clock, Phase,  
Horizontal Position, Vertical Position, Information)  
INFORMATION  
RECALL  
SYSTEM  
SYSTEM  
* Reset monitor parameters back to factory preset values.  
* Select the display ratio from Native, and Full Screen  
* Full Screen: adjust and enlarge the display screen to full  
screen size.  
FULLSCREEN  
DISPLAY RATIO  
* Display equality screen according to the original ratio.  
* Adjust the balance of the input signal.  
NATIVE SCREEN  
WHITE BALANCE  
- 5 -  
 
Troubleshooting  
Symptom  
Check Items  
1.No picture  
1. Check if the monitor is turned on (press the button  
again).  
2.LED indicator is not lit.  
2. Check if the power cord is properly connected to the monitor and power outlet.  
3 .Check if there is electricity coming from the power outlet (use another device to check for power).  
1.No picture  
1 Check if your computer is turned on.  
2.LED indicator is orange  
2 Ensure the computer is not in power saving mode (move the mouse or press a key on the keyboard  
to wake up the computer).  
3 Check if the video signal cable is properly connected to the monitor and computer.  
1.Picture shows “ NO SIGNAL INPUT ”  
1 Check if your computer is turned on.  
2 Check if the video signal cable is properly connected to the monitor and computer.  
1.Picture shows “ INPUT SIGNAL OUT OF RANGE ” 1. Ensure that the resolution and/or refresh rate is set correctly.  
Make sure your display setup is under 18.5" VESA 1366X768@60Hz, 21.6" VESA 1920x1080@ 60Hz.  
Important  
- 6 -  
 
Technical Features and Specifications  
Interface Frequency  
Item  
Description  
18.5"  
21.6"  
18.5"  
409.8(H) x 230.4(V)mm  
477.5 (H) x 268.6 (V)mm  
0.300(H) x 0.300(V)mm  
1. The following frequency range is the working period. If the entered mode between below  
period but not match the frequency of supported timing, display optimization would not be  
assured. If the entered mode is out of the working period, the display will be blanking  
(just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.  
Display Size  
Panel  
Pixel Pitch  
Analog  
0.248 (H) x 0.248 (V)mm  
D-sub  
21.6"  
2. Basically, mode judgment is regardless the sync polarity except both or more modes that  
are all belong to the supported timing list and could be judged by sync polarity only.  
Connector  
Tilt  
DVI-D(Optional)  
-5°~15°  
Digital  
3. In the meantime, real entered frequency of the supported timing is not requested exactly.  
4. Normalization of VGA card’ s deviation will be acceptable.  
Tilt Angle  
18.5"  
21.6"  
18.5"  
21.6"  
About 440(W)x359(H)x195(D)mm  
About 510(W)x392(H)x195(D)mm  
About 3.4kg  
Dimensions  
(W x H x D)  
Net  
5. Horizontal Frequency  
6. Vertical Frequency  
31 ~ 82KHz  
56 ~ 76Hz  
Weight  
Power  
Net  
AC  
About 4.2kg  
AC 100~240V,50Hz/60Hz,1.2A  
Active:<25W/Standby:<1W  
Active:<55W/Standby:<2W  
0°C to 40°C  
18.5"  
21.6"  
Consumption  
Temperature  
Humidity  
Operating  
Condition  
20% to 90%  
0~10,000 ft.  
Altitude  
-20°C to 60°C  
Temperature  
Humidity  
Storage  
10% to 90%  
Condition  
0~40,000 ft.  
Altitude  
- 7 -  
 
FCC compliance  
1.This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions (1) this device may not cause harmful interference, and (2)  
this device must accept any interference received, including interference that may  
cause undesired operation.  
2.NOTE: This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation, If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
3.Reorient or relocate the receiving antenna.  
4.Increase the separation between the equipment and receiver.  
5.Connect the equipment to an outlet on a circuit different from that to which the receiver  
is connected.  
6.Consult the dealer or an experienced radio/TV technician for help.  
Any unauthorized modification to this equipment could result in  
the revocation of the authorization to operate the equipment and  
void the product warranty.  
WARNING:  
Manufactured by InnoLux Display Corp.  
- 8 -  
 
Westinghouse Digital Electronics  
Santa Fe Springs, CA  
SE-UM-1914-0801  
 

Weider Fitness Equipment WESY7974O User Manual
West Bend Kitchen Grill 6113 User Manual
Western Digital Computer Drive WDBUWZ0020JBK User Manual
Westinghouse Outdoor Ceiling Fan ul es bethany who9 User Manual
Whirlpool Microwave Oven 311435 User Manual
Winegard Car Satellite TV System MA1055G User Manual
Wolf Appliance Company Range IS15 S User Manual
Worth Data Barcode Reader LZ360 USB User Manual
Yamaha Outboard Motor lx225z User Manual
Zephyr Ventilation Hood Z1C 00SU User Manual